INSTALLATION NOTES for OpenBSD/mvme68k 3.0


What is OpenBSD?
----------------

OpenBSD is a fully functional, multi-platform UN*X-like Operating
System based on Berkeley Networking Release 2 (Net/2) and 4.4BSD-Lite.
There are several operating systems in this family, but OpenBSD
differentiates itself by putting security and correctness first. The
OpenBSD team strives to achieve what is called 'a secure by default'
status.  This means that an OpenBSD user should feel safe that their
newly installed machine will not be compromised.  This 'secure by
default' goal is achieved by taking a proactive stance on security.

Since security flaws are essentially mistakes in design or implement-
ation, the OpenBSD team puts as much importance on finding and fixing
existing design flaws and implementation bugs as it does writing new
code.  This means that an OpenBSD system will not only be more secure,
but it will be more stable.  The source code for all critical system
components has been checked for remote-access, local-access, denial-
of-service, data destruction, and information-gathering problems.

In addition to bug fixing, OpenBSD has integrated strong cryptography
into the base system.  A fully functional IPsec implementation is
provided as well as support for common protocols such as SSL and SSH.
Network filtering and monitoring tools such as packet filtering, NAT, and
bridging are also standard.  For high performance demands, support for
hardware cryptography has also been added to the base system.  Because
security is often seen as a tradeoff with usability, OpenBSD provides
as many security options as possible to allow the user to enjoy secure
computing without feeling burdened by it.

To integrate more smoothly in other environments, OpenBSD 3.0 also
provides several binary emulation subsystems (which includes
iBCS2, Linux, OSF/1, SunOS, SVR4, Solaris, and Ultrix compatibility),
aiming at making the emulation as accurate as possible so that it is
transparent to the user.

Many new user programs and device drivers have been added in OpenBSD
3.0, as well, bringing it closer to our goal of supplying a complete
and modern UN*X-like environment.  Tools like perl and an improved ksh
are standard, as are numerous other useful tools.

Because OpenBSD is from Canada, the export of Cryptography pieces
(such as SSH, IPsec, and Kerberos) to the world is not restricted.

(NOTE: OpenBSD can not be re-exported from the US once it has entered
the US.  Because of this, take care NOT to get the distribution from
an FTP server in the US if you are outside of Canada and the US.)


OpenBSD/mvme68k 3.0 was written under contract for Willowglen Singapore
for an embedded application.  Theo de Raadt, Dale Rahn, Chuck Cranor, 
and Steve Murphree were involved in working on this port which runs on 
the MVME147, MVME162, MVME167, MVME172, MVME177 and perhaps other models
also.



Sources of OpenBSD:
-------------------

This is a list of currently known ftp servers as the time of the 3.0 release:

Main server in Canada:
ftp://ftp.openbsd.org/pub/OpenBSD

Argentina:

ftp://ftp.openbsd.org.ar/pub/OpenBSD

Australia:

ftp://ftp.au.openbsd.org/pub/OpenBSD
ftp://ftp.it.net.au/mirrors/OpenBSD
ftp://ftp.planetmirror.com/pub/OpenBSD
ftp://ftp.wiretapped.net/pub/OpenBSD
ftp://mirror.aarnet.edu.au/pub/OpenBSD

Austria:

ftp://gd.tuwien.ac.at/opsys/OpenBSD
ftp://mingus.wu-wien.ac.at/pub/OpenBSD

Belgium:

ftp://openbsd.rug.ac.be/pub/OpenBSD

Canada:

ftp://ftp.ca.openbsd.org/pub/OpenBSD
ftp://gulus.usherb.ca/pub/OpenBSD

China (Hong Kong):

ftp://ftp.shellhung.org/pub/OpenBSD

Czech Republic:

ftp://ftp.openbsd.cz/pub/OpenBSD

Finland:

ftp://ftp.fi.debian.org/pub/OpenBSD
ftp://ftp.jyu.fi/pub/OpenBSD

France:

ftp://ftp.fr.openbsd.org/pub/OpenBSD
ftp://ftp.bsdfr.org/pub/OpenBSD
ftp://ftp.grolier.fr/pub/OpenBSD

Germany:

ftp://ftp.de.openbsd.org/pub/unix/OpenBSD
ftp://ftp.freenet.de/pub/ftp.openbsd.org/pub/OpenBSD
ftp://ftp.gigabell.net/pub/OpenBSD
ftp://ftp.leo.org/pub/OpenBSD
ftp://ftp.fh-wolfenbuettel.de/pub/os/openbsd

Greece:

ftp://filoktitis.noc.uoa.gr/pub/OpenBSD
ftp://ftp.duth.gr/pub/OpenBSD

Hungary:

ftp://ftp.fsn.hu/pub/OpenBSD

Ireland:

ftp://ftp.esat.net/pub/OpenBSD

Italy:

ftp://ftp.volftp.mondadori.com/mirror/openbsd

Japan:

ftp://ftp.jp.openbsd.org/pub/OpenBSD
ftp://ftp.netlab.is.tsukuba.ac.jp/pub/os/OpenBSD
ftp://ftp.kddlabs.co.jp/OpenBSD

The Netherlands:

ftp://ftp.calyx.nl/pub/OpenBSD
ftp://ftp.nl.uu.net/pub/OpenBSD
ftp://ftp.nluug.nl/pub/OpenBSD

New Zealand:

ftp://ftp.nz.openbsd.org/pub/OpenBSD

Norway:

ftp://ftp.inet.no/pub/OpenBSD
ftp://ftp.uninett.no/pub/OpenBSD

Peru:

ftp://ftp.sajinet.com.pe/pub/OpenBSD

Russia:

ftp://ftp.chg.ru/pub/OpenBSD
ftp://ftp.radio-msu.net/pub/OpenBSD
ftp://vell.nsc.ru/pub/OpenBSD

Saudi Arabia:

ftp://ftp.isu.net.sa/pub/mirrors/ftp.openbsd.org/pub/OpenBSD

South Korea:

ftp://ftp.snu.ac.kr/pub/BSD/OpenBSD

Spain:

ftp://ftp.rediris.es/mirror/OpenBSD

Sweden:

ftp://ftp.luth.se/pub/OpenBSD
ftp://ftp.stacken.kth.se/pub/OpenBSD
ftp://ftp.sunet.se/pub/OpenBSD

Switzerland:

ftp://sunsite.cnlab-switch.ch/pub/OpenBSD

Taiwan:

ftp://openbsd.csie.nctu.edu.tw/pub/OpenBSD
ftp://ftp.tku.edu.tw/pub/OpenBS

Thailand:

ftp://ftp.kmitl.ac.th/pub/OpenBSD

United Kingdom:

ftp://ftp.knowledge.com/pub/mirrors/OpenBSD
ftp://ftp.plig.org/pub/OpenBSD
ftp://sunsite.org.uk/Mirrors/ftp.openbsd.org/pub/OpenBSD

USA:

ftp://ftp1.usa.openbsd.org/pub/OpenBSD
ftp://ftp3.usa.openbsd.org/pub/OpenBSD
ftp://ftp5.usa.openbsd.org/pub/OpenBSD
ftp://ftp7.usa.openbsd.org/pub/os/OpenBSD
ftp://archive.progeny.com/OpenBSD
ftp://carroll.cac.psu.edu/pub/OpenBSD
ftp://download.sourceforge.net/pub/mirrors/OpenBSD
ftp://ftp.cse.buffalo.edu/pub/OpenBSD
ftp://ftp.groupbsd.org/pub/OpenBSD
ftp://ftp.op.net/pub/OpenBSD
ftp://ftp.src.uchicago.edu/pub/OpenBSD
ftp://ftp.tux.org/bsd/openbsd
ftp://gandalf.neark.org/pub/distributions/OpenBSD
ftp://mirror.cs.wisc.edu/pub/mirrors/OpenBSD
ftp://mirror.csit.fsu.edu/pub/OpenBSD
ftp://mirrors.netnumina.com/openbsd
ftp://mirrors.rcn.net/pub/OpenBSD
ftp://rt.fm/pub/OpenBSD

As well, the file ftp://ftp.openbsd.org/pub/OpenBSD/3.0/ftplist
contains a list which is continually updated.  If you wish to become a
distribution site for OpenBSD, contact miod@openbsd.org.





OpenBSD 3.0 Release Contents:
-----------------------------

The OpenBSD 3.0 release is organized in the following way.  In the
.../3.0 directory, for each of the architectures having an OpenBSD 3.0
binary distribution, there is a sub-directory.

The mvme68k-specific portion of the OpenBSD 3.0 release is found in the
"mvme68k" subdirectory of the distribution.  That subdirectory is laid
out as follows:

.../3.0/mvme68k/
		INSTALL.mvme68k	Installation notes; this file.

		CKSUM		Output of the cksum(1) and md5(1) programs
		MD5		usable for verification of the correctness
				of downloaded files.

		*.tgz		mvme68k binary distribution sets;
				see below.

		bsd		A stock GENERIC mvme68k kernel which
				will be installed on your system
				during the install.

		bsd.rd		A compressed RAMDISK kernel; the embedded
				filesystem contains the installation tools.
				Used for simple installation from a pre-
				existing system.

		installboot	The OpenBSD/mvme68k boot loader
				installation program.
		bootxx		The OpenBSD/mvme68k boot block.
		bootsd		The OpenBSD/mvme68k disk boot loader.
		bootst		The OpenBSD/mvme68k tape boot loader.
		rboot		A standalone bootrom for the MVME147, in
				S-records format.
		sboot		A network bootloader for the MVME147, in
				S-records format.
		stboot		A VID tape block.

These files can be used to make a boot tape suitable for installation.
They can also be used to configure an NFS server to support installation
"over the network".  See the section "Getting the OpenBSD system onto
Useful Media" for more information.

The OpenBSD/mvme68k binary distribution sets contain the binaries which
comprise the OpenBSD 3.0 release for mvme68k systems.  There are nine
binary distribution sets.  The binary distribution sets can be found in
the "mvme68k" subdirectory of the OpenBSD 3.0 distribution tree,
and are as follows:

	base30	 The OpenBSD/mvme68k 3.0 base binary distribution.  You
		 MUST install this distribution set.  It contains the
		 base OpenBSD utilities that are necessary for the
		 system to run and be minimally functional.
		 It includes shared library support, and excludes
		 everything described below.
		 [ 21.7 MB gzipped, 65.9 MB uncompressed ]

	comp30	 The OpenBSD/mvme68k Compiler tools.  All of the tools
		 relating to C, C++, and fortran are supported. This set
		 includes the system include files (/usr/include), the
		 linker, the compiler tool chain, and the various system
		 libraries (except the shared libraries, which are
		 included as part of the base set).
		 This set also includes the manual pages for all
		 of the utilities it contains, as well as the system
		 call and library manual pages.
		 [ 15.2 MB gzipped, 45.2 MB uncompressed ]

	etc30	 This distribution set contains the system configuration
		 files that reside in /etc and in several other places.
		 This set MUST be installed if you are installing the
		 system from scratch, but should NOT be used if you are
		 upgrading.  (If you are upgrading, it's recommended that
		 you get a copy of this set and CAREFULLY upgrade your
		 configuration files by hand.)
		 [ 1.1 MB gzipped, 3.3 MB uncompressed ]

	game30	 This set includes the games and their manual pages.
		 [ 2.8 MB gzipped, 6.6 MB uncompressed ]

	man30	 This set includes all of the manual pages for the
		 binaries and other software contained in the base set.
		 Note that it does not include any of the manual pages
		 that are included in the other sets.
		 [ 5.6 MB gzipped, 20.2 MB uncompressed ]

	misc30	 This set includes the system dictionaries (which are
		 rather large), the typesettable document set, and
		 man pages for other architectures which happen to be
		 installed from the source tree by default.
		 [ 1.7 MB gzipped, 5.6 MB uncompressed ]

	xbase30  This set includes the base X distribution.  This includes
		 programs, headers, libraries, configuration files.

	xfont30  This set includes all of the X fonts.

	xshare30 This set includes all text files equivalent between
		 all architectures.



OpenBSD System Requirements and Supported Devices:
--------------------------------------------------

OpenBSD/mvme68k 3.0 runs on the following classes of machines:
	- MVME147 - Motorola with 68030 and 68881
	- MVME162 - Motorola with 68040
	- MVME167 - Motorola with 68040
	- MVME172 - Motorola with 68060
	- MVME177 - Motorola with 68060

The minimal configuration requires 8M of RAM and ~60M of disk space.
To install the entire system requires much more disk space, and to 
compile the system, more RAM is recommended (OpenBSD with 8M of
RAM feels like Solaris with 8M of RAM). Note that until you have
around 16M of RAM, getting more RAM is more important than getting a
faster CPU board).

Supported devices include:

MVME147:
	serial ports: 
		on-board ttya-ttyd
	ethernet:
		on-board AMD 7990 Lance ethernet ("le0")
	SCSI:
		on-board WD33C93 controller
	parallel:
		a driver exists, but it is not integrated.
	VMEbus:
		not supported (some cards have issues)

MVME162, MVME172:
	serial ports:
		on-board tty00-03 - Zilog Z85230 SCC
	ethernet:
		on-board Intel 82596CA ethernet ("ie0")
	SCSI:
		on-board NCR53c710 controller
	VME:
		drivers for short I/O access
	Flash:
		1 MB flash, either Intel 28F008SA or 28F020
		driver is available, but doesn't work
		Jumper GPIO3 selects Flash memory map and must
		be installed for booting with the Flash driver (default)
	SRAM:
		supported
	VMEbus:
		untested
	IP:
		untested

MVME167, MVME177:
	serial:
		on-board tty00 - tty03 - Cirrus Logic CD2401
	ethernet: 
		on-board Intel 82596CA ethernet ("ie0")
	SCSI: 
		on-board NCR53c710 controller
	parallel:
		not supported
	SRAM:
		supported
	VMEbus:
		supported
		

Faithful clones of the above boards should also work.

Additional VMEbus devices include:

	MVME328 SCSI controller ("vs")

	MVME376 VME bus ethernet ("le*")



Getting the OpenBSD System onto Useful Media:
---------------------------------------------

Installation is supported from several media types, including:

	CD-ROM
	FFS partitions
	Tape
	Remote NFS partitions
	FTP
	HTTP

The steps necessary to prepare the distribution sets for installation
depend on which method of installation you choose.  Some methods
require a bit of setup first that is explained below.

The installation allows installing OpenBSD directly from FTP mirror
sites over the internet, however you must consider the speed and 
reliability of your internet connection for this option.  It may save
much time and frustration to use ftp get/reget to transfer the
distribution sets to a local server or disk and perform the installation
from there, rather than directly from the internet.

The variety of options listed may seem confusing, but situations vary
widely in terms of what peripherals and what sort of network arrangements
a user has, the intent is to provide some way that will be practical.


Create an (optionally bootable) installation tape:

	To install OpenBSD from a tape, you need to make a tape that
	contains the distribution set files, each in "tar" format or in
	"gzipped tar format".  First you will need to transfer the
	distribution sets to your local system, using ftp or by
	mounting the CD-ROM containing the release.  Then you need to
	make a tape containing the files. 
        
	If you're making the tape on a UN*X-like system, the easiest way
	to do so is make a shell script along the following lines, call it
	"/tmp/maketape". 
        
	#! /bin/sh
	TAPE=${TAPE:-/dev/nrst0}
	mt -f ${TAPE} rewind
	if test $# -lt 1
	then
		dd of=${TAPE} if=stboot obs=512
		dd of=${TAPE} if=bootst obs=512
		dd of=${TAPE} if=bsd.rd obs=8k conv=sync
	fi
	for file in base etc comp game man misc xbase xfont xshare
	do
		dd if=${file}30.tgz of=${TAPE} obs=8k conv=sync
	done    
	tar cf ${TAPE} bsd
	mt -f ${TAPE} offline
	# end of script

	And then:

	cd .../3.0/mvme68k
	sh -x /tmp/maketape

        Note that, by default, this script creates a bootable tape. If
	you only want to fetch the OpenBSD files from tape, but want to
	boot from another device, you can save time and space creating
	the tape this way:

        cd .../3.0/mvme68k
        sh -x /tmp/maketape noboot

	If you're using a system other than OpenBSD or SunOS, the tape
	name and other requirements may change.  You can override the
	default device name (/dev/nrst0) with the TAPE environment
	variable.  For example, under Solaris, you would probably run:

	TAPE=/dev/rmt/0n sh -x /tmp/maketape

	Note that, when installing, the tape can be write-protected
	(i.e. read-only).

To install OpenBSD using a remote partition, mounted via
NFS, you must do the following:

	NOTE:	This method of installation is recommended only for
		those already familiar with using BSD network
		configuration and management commands.  If you aren't,
		this documentation should help, but is not intended to
		be all-encompassing.

	Place the OpenBSD distribution sets you wish to install
	into a directory on an NFS server, and make that directory
	mountable by the machine on which you are installing or
	upgrading OpenBSD.  This will probably require modifying
	the /etc/exports file of the NFS server and resetting
	its mount daemon (mountd).  (Both of these actions will
	probably require superuser privileges on the server.)

	You need to know the numeric IP address of the NFS
	server, and, if the server is not on a network directly
	connected to the machine on which you're installing or
	upgrading OpenBSD, you need to know the numeric IP address
	of the router closest to the OpenBSD machine.  Finally,
	you need to know the numeric IP address of the OpenBSD
	machine itself.

	Once the NFS server is set up properly and you have the
	information mentioned above, you can proceed to the next
	step in the installation or upgrade process.  If you're
	installing OpenBSD from scratch, go to the section on
	preparing your hard disk, below.  If you're upgrading an
	existing installation, go directly to the section on
	upgrading.

If you are upgrading OpenBSD, you also have the option of installing
OpenBSD by putting the new distribution sets somewhere in your
existing file system, and using them from there.  To do that, do
the following:

	Place the distribution sets you wish to upgrade somewhere
	in your current file system tree.  At a bare minimum, you
	must upgrade the "base" binary distribution, and so must
	put the "base30" set somewhere in your file system.  It
	is recommended that you upgrade the other sets, as well.



Preparing your System for OpenBSD Installation:
-----------------------------------------------

Before installing OpenBSD on your machine, you will want to check your
machine's NVRAM settings.

The defaults settings are usually suitable for OpenBSD; make sure the
environment is configured in BUG mode. You can check and change this with
the ENV command.

You wil need to check that the ethernet address is correct as well, with
the LSAD command.

Some models also require specific preparation:
MVME147:
	Make sure the word at memory FFFE0764 is correct. Its value should
	be zero if you don't have any VMEBus memory cards. You can change
	its value with the MM command.

MVME162:
	Be sure to use the SET command to set the date before trying
	to use the ethernet support in the 162-Bug.

If you plan to boot from the network, make sure your ENV settings match
the following setup:

Network Auto Boot Enable [Y/N]   = N? y
Network Auto Boot at power-up only [Y/N] = Y? n
Network Auto Boot Abort Delay    = 5? 2
Network Auto Boot Configuration Parameters Pointer (NVRAM) = 00000000? fffc0080



Installing the OpenBSD System:
------------------------------

Installing OpenBSD is a relatively complex process, but if you have
this document in hand and are careful to read and remember the
information which is presented to you by the install program, it
shouldn't be too much trouble.

Before you begin, you should know the geometry of your hard disk, i.e.
the sector size (note that sector sizes other than 512 bytes are not
currently supported), the number of sectors per track, the number of
tracks per cylinder (also known as the number of heads), and the
number of cylinders on the disk.  The OpenBSD kernel will try to
discover these parameters on its own, and if it can it will print them
at boot time.  If possible, you should use the parameters it prints.
(You might not be able to because you're sharing your disk with
another operating system, or because your disk is old enough that the
kernel can't figure out its geometry.)

There are several ways to install OpenBSD onto a disk. The easiest way
in terms of preliminary setup is to use the OpenBSD ramdisk kernel that can
be booted from tape.

Alternatively, if your mvme68k is hooked up in a network you can find a server
to arrange for a diskless setup, which is a convenient way to install on a
machine whose disk does not currently hold a usable operating system.
This is difficult to get set up correctly the first time, but easy to
use afterwards.  (see ``Installing using a diskless setup'' below).


Booting from the Installation Media:

Prior to attempting an installation, you should make sure that everything
of value on the target system has been backed up.  While installing OpenBSD
does not necessarily wipe out all the partitions on the hard disk, errors
during the install process can have unforeseen consequences and you will
probably render the system unbootable if you start, but do not complete
the installation.  Having the installation media for the prior installation,
like a Motorola SystemV/mvme68k tape is good insurance if you want to be
able to "go back" for some reason.

After taking care of all that, bring your system down gracefully using
the shutdown(8) and/or halt(8) commands.  This will get you to the BUG
prompt.


Booting from SCSI tape:

After creating the boot tape, boot it by typing the appropriate command
at the PROM:

	167-bug> bo xx yy

Where `xx' is the SCSI controller number (00 for the built-in SCSI
controller), and `yy' is ten times the tape drive ID, except for the
MVME147, where `xx' should be the tape drive ID, and `yy' should be 00.

For example, booting from a tape drive using SCSI id 4:
	147-bug> bo 04 00
for a MVME147, and
	167-bug> bo 00 40
for any other mvme68k board.


Installing using a diskless setup:

First, you must setup a diskless client configuration on a server. If
you are using a OpenBSD system as the boot-server, have a look at the
diskless(8) manual page for guidelines on how to proceed with this.
If the server runs another operating system, you'll have to consult
documentation that came with it (on SunOS systems, add_client(8) and
the Sun System/Networks administrators guide constitute a good start;
on Solaris systems, share(1M) is a good starting point as well).

You should then setup your workstation using the NIOT command at the BUG
prompt. The Load Address should be 0x3F0000, and the Execution Address
should be 0x3F0000 as well. You may now boot your workstation from the
server by entering the NBO command at the BUG prompt:
	
	167-bug> nbo 00 00 bsd.rd

If your BUG version does not understand the NIOT and NBO commands (most
MVME147 don't), you will have to boot via S-Records.


Booting from S-Records:

First, you must setup a diskless client configuration on a server. If
you are using a OpenBSD system as the boot-server, have a look at the
diskless(8) manual page for guidelines on how to proceed with this.
If the server runs another operating system, you'll have to consult
documentation that came with it (on SunOS systems, add_client(8) and
the Sun System/Networks administrators guide constitute a good start;
on Solaris systems, share(1M) is a good starting point as well).

Second, make sure you use a terminal emulator able to read files from the
local machine and send their contents over the serial link. OpenBSD ships
with both cu(1) and tip(1), but others can be used.

After reseting your mvme68k board, enter "LO" at the BUG prompt. If you get
an error message, switch directories (enter "SD") and retry. The mvme68k
should be awaiting a S-Record program now.

From your terminal emulator, send the contents of the ``sboot'' file over
the line. Depending on the speed of the serial link, this will take some
time, but no more than a couple of minutes.

If you don't get a prompt back after a few minutes, send a break, reset
your mvme68k board, and retry.

When the transfer is finished, enter "GO" at the BUG prompt.  The S-Records
boot loader will start.  This is a very crude bootloader which will attempt
to fetch a secondary boot program via TFTP requests, like the NBO command.

This will cause the kernel provided by the diskless setup to be booted.
After the initial probe messages you'll asked to start the install
or upgrade procedure.



Installing using the tape or netboot procedure:

You should now be ready to install OpenBSD.

The following is a walk-through of the steps you will take while
getting OpenBSD installed on your hard disk.  If any question has a
default answer, it will be displayed in brackets ("[]") after the  
question.  If you wish to stop the installation, you may hit Control-C
at any time, but if you do, you'll have to begin the installation
process again from scratch.  Using Control-Z to suspend the process
may be a better option, or at any prompt enter '!' to get a shell,
from which 'exit' will return you back to that prompt (no refresh
of the prompt though).

	Boot your machine from the installation media as described above.

	It will take a while to load the kernel especially from a floppy
	or slow network connection, most likely more than a minute.  If
	some action doesn't eventually happen, or the spinning cursor has
	stopped and nothing further has happened, either your boot media
	is bad, your diskless setup isn't correct, or you may have
	a hardware or configuration problem.

	Once the kernel has loaded, you will be presented with the
	OpenBSD kernel boot messages.  You will want to read them
	to determine your disk's name and geometry.  Its name will
	be something like "sd0" or "wd0" and the geometry will be
	printed on a line that begins with its name.  As mentioned
	above, you will need your disk's geometry when creating
	OpenBSD partitions.  You will also need to know the device
	name to tell the install tools what disk to install on. If
	you cannot read the messages as they scroll by, do not
	worry -- you can get at this information later inside the
	install program.

	While booting, you will probably see several warnings.  You
	may be warned that the kernel can't figure out what device
	it booted from.  Do not be alarmed, this is completely normal.
	This warning occurs because while OpenBSD/mvme68k can boot from
	the floppy drive, the kernel itself lacks a floppy driver for some
	mvme68k models.

	You will next be asked for your terminal type.  You should choose
	the terminal type from amongst those listed.
	(If your terminal type is xterm, just use vt100).

	After entering the terminal type you will be greeted by a
	welcome message and asked if you really want to continue.
	Assuming you answered yes, the install program will then tell
	you which disks of that type it can install on, and ask you
	which it should use.  The name of the disk is typically "sd0".
	Reply with the name of your disk.

	Next you will have to edit or create a disklabel for the disk
	OpenBSD is being installed on.  The installation script will
	invoke the text editor allowing you to do this.  Note that
	partition 'c' inside this disk label should ALWAYS reflect the
	entire disk, including any non-OpenBSD portions.  The root file
	system should be in partition 'a', and swap is usually in partition
	'b'.  It is recommended that you create separate partitions for
	root and /usr, you may also want to specify /var and /home
	partitions.

	The swap partition (usually 'b') should have a type of "swap", all
	other native OpenBSD partitions should have a type of "4.2BSD".
	Block and fragment sizes are usually 8192 and 1024 bytes, but can
	also be 16384 and 2048 bytes.

	The install program will now label your disk and ask which file
	systems should be created on which partitions.  It will auto-
	matically select the 'a' partition to be the root file system.
	Next it will ask for which disk and partition you want a file
	system created on.  This will be the same as the disk name (e.g.
	"sd0") with the letter identifying the partition (e.g. "d")
	appended (e.g. "sd0d").  Then it will ask where this partition is
	to be mounted, e.g. /usr.  This process will be repeated until
	you type "done".

	At this point you will be asked to confirm that the file system
	information you have entered is correct, and given an opportunity
	to change the file system table.  Next it will create the new file
	systems as specified, OVERWRITING ANY EXISTING DATA.  This is the
	point of no return.

	After all your file systems have been created, the install program
	will give you an opportunity to configure the network.  The network
	configuration you enter (if any) can then be used to do the install
	from another system using NFS, HTTP or FTP, and will also be the
	configuration used by the system after the installation is complete.

	If you select to configure the network, the install program will
	ask you for a name of your system and the DNS domain name to use.
	Note that the host name should be without the domain part, and that
	the domain name should NOT include the host name part.

	Next the system will give you a list of network interfaces you can
	configure.  For each network interface you select to configure, it
	will ask for the IP address to use, the symbolic host name to use,
	the netmask to use and any media flags to set.

	After all network interfaces have been configured the install pro-
	gram will ask for a default route and IP address of the primary
	name server to use.  You will also be presented with an opportunity
	to edit the host table.

	At this point you will be allowed to edit the file system table
	that will be used for the remainder of the installation and that
	will be used by the finished system, following which the new file
	systems will be mounted to complete the installation.

	After these preparatory steps have been completed, you will be
	able to extract the distribution sets onto your system.  There
	are several install methods supported; FTP, HTTP, tape, CD-ROM, NFS
	or a local disk partition.

	To install via FTP:
		To begin an FTP install you will need the following
		pieces of information.  Don't be daunted by this list;
		the defaults are sufficient for most people.
		    1) Proxy server URL if you are using a URL-based
		       ftp proxy (squid, CERN ftp, Apache 1.2 or higher).
		       You need to define a proxy if you are behind a
		       firewall that blocks outgoing ftp (assuming you
		       have a proxy available to use).
		    2) Do you need to use active mode ftp?  By default,
		       ftp will attempt to use passive mode and fall
		       back to an active connection if the server does
		       not support passive mode.  You only need to enable
		       this option if you are connecting to a buggy ftp
		       daemon that implements passive ftp incorrectly.
		       Note that you will not be asked about active
		       ftp if you are using a proxy.
		    3) The IP address (or hostname if you enabled
		       DNS earlier in the install) of an ftp server
		       carrying the OpenBSD 3.0 distribution.
		       If you don't know, just hit return when
		       asked if you want to see a list of such hosts.
		    4) The ftp directory holding the distribution sets.
		       The default value of pub/OpenBSD/3.0/mvme68k
		       is almost always correct.
		    5) The login and password for the ftp account.
		       You will only be asked for a password for
		       non-anonymous ftp.

		For instructions on how to complete the installation via
		ftp, see the section named "Common URL installations" below.

	To install via HTTP:
		To begin an HTTP install you will need the following
		pieces of information:
		    1) Proxy server URL if you are using a URL-based
		       http proxy (squid, CERN ftp, Apache 1.2 or higher).
		       You need to define a proxy if you are behind a
		       firewall that blocks outgoing http connections
		       (assuming you have a proxy available to use).
		    2) The IP address (or hostname if you enabled
		       DNS earlier in the install) of an http server
		       carrying the OpenBSD 3.0 distribution.
		       If you don't know, just hit return when
		       asked if you want to see a list of such hosts.
		    3) The directory holding the distribution sets.
		       There is no standard location for this;
		       You should use the directory specified
		       along with the server in the list of official
		       http mirror sites that you received in step 3.

		For instructions on how to complete the installation via
		http, see the section named "Common URL installations" below.

	To install from tape:
		In order to install from tape, the distribution sets to be
		installed must have been written to tape previously, either
		in tar format or gzip-compressed tar format.

		You will also have to identify the tape device where the
		distribution sets are to be extracted from.  This will
		typically be "nrst0" (no-rewind, raw interface).

		Next you will have to provide the file number of the set
		that is to be extracted.  Note that the file number starts
		at 1, which is the first file written to the tape, unless
		you have created a bootable tape, in which case the file
		number starts at 4.

		The install program will not automatically detect whether
		an image has been compressed, so it will ask for that
		information before starting the extraction.

	To install from CD-ROM:
		When installing from a CD-ROM, you will be asked which
		device holds the distribution sets.  This will typically
		be "cd0".  Next you will be asked which partition on the
		CD-ROM the distribution is to be loaded from.  This is
		normally partition "a".

		Next you will have to identify the file system type that
		has been used to create the distribution on the CD-ROM,
		this can be either FFS or ISO CD9660.  The OpenBSD CD
		distribution uses the CD9660 format.

		You will also have to provide the relative path to the
		directory on the CD which holds the distribution, for the
		mvme68k this is "3.0/mvme68k".

		For instructions on how to complete the installation from
		the CD-ROM distribution, see the section named "Common
		file system installations" below.
		
	To install from a NFS mounted directory:
		When installing from a NFS-mounted directory, you must
		have completed network configuration above, and also
		set up the exported file system on the NFS server in
		advance.

		First you must identify the IP address of the NFS server
		to load the distribution from, and the file system the
		server expects you to mount.

		The install program will also ask whether or not TCP
		should be used for transport (the default is UDP).  Note
		that TCP only works with newer NFS servers.

		You will also have to provide the relative path to the
		directory on the file system where the distribution sets
		are located.  Note that this path should not be prefixed
		with a '/'.

		For instructions on how to complete the installation from
		the CD-ROM distribution, see the section named "Common
		file system installations" below.

	To install from a local disk partition:
		When installing from a local disk partition, you will
		first have to identify which disk holds the distribution
		sets.  This is normally "sdN" where N is a number
		0 through 9.  Next you will have to identify the partition
		within that disk that holds the distribution, this is a
		single letter between 'a' and 'p'.

		You will also have to identify the type of file system
		residing in the partition identified.  Currently, you can
		only install from partitions that has been formatted as the
		Berkeley fast file system (ffs).

		You will also have to provide the relative path to the
		directory on the file system where the distribution sets
		are located.  Note that this path should not be prefixed
		with a '/'.

		For instructions on how to complete the installation from
		the a local disk partition, see the next section.

	Common file system installations:
		The following instructions are common to installations
		from local disk partitions, NFS mounted directories and
		CD-ROMs.

		A list of available distribution sets will be listed.
		You may individually select distribution sets to install
		or enter `all' to install all of the sets (which is what
		most users will want to do).  You may also enter `list'
		to get a file list or `done' when you are done selecting
		distribution sets.  You may also use wildcards in place of
		a file name, e.g. `*.tgz' or even `base*|comp*'.  It is
		also possible to enter an arbitrary filename and have it
		treated as a file set.

		Once you have selected the file sets you want to install
		and entered `done' you will be prompted to verify that
		you really do want to extract file sets.  Assuming you
		acquiesce, the files will begin to extract.  If not, you
		will be given the option of installing sets via one of
		the other install methods.
		
	Common URL installations:
		Once you have entered the required information, the
		install program will fetch a file list and present
		a list of all the distribution sets that were found
		in the specified directory.  (If no valid sets were found,
		you will be notified and given the option of unpacking
		any gzipped tar files found or getting a file list if
		none were found.)

		At this point you may individually select distribution
		sets to install or enter `all' to install all of the
		sets (which is what most users will want to do).  You
		may also enter `list' to get a file list or `done' when
		you are done selecting distribution sets.  You may also
		use wildcards in place of a file name, e.g. `*.tgz' or
		even `base*|comp*'.  It is also possible to enter an
		arbitrary filename and have it treated as a file set.

		Once you have selected the file sets you want to install
		and entered `done' you will be prompted to verify that
		you really do want to download and install the files.
		Assuming you acquiesce, the files will begin to download
		and unpack.  If not, you will be given the option of
		installing sets via one of the other install methods.


	When all the selected distribution sets has been extracted, you
	will be allowed to select which time zone your system will be
	using, all the device nodes needed by the installed system will
	be created for you and the file systems will be unmounted.  For
	this to work properly, it is expected that you have installed
	at least the "base30", "etc30", and "bsd" distribution sets.

Congratulations, you have successfully installed OpenBSD 3.0.  When you
reboot into OpenBSD, you should log in as "root" at the login prompt.
You should create yourself an account and protect it and the "root" account 
with good passwords.  You should have got a mail from the install program we 
recommend you to read, it contains answers to basic questions you might
have about OpenBSD (like setting up your system, installing packages, getting
more information about OpenBSD, sending in your dmesg output and more).
This you can do by running

	mail

and then just enter "1" to get the first message.  You quit mail by
entering "q".

Some of the files in the OpenBSD 3.0 distribution might need to be
tailored for your site.  We recommend you run:

	man afterboot

which will tell you about a bunch of the files needing to be reviewed.
If you are unfamiliar with UN*X-like system administration, it's
recommended that you buy a book that discusses it.



Net Boot or Diskless Setup Information:

The set up is similar to SunOS diskless setup, but not identical, because
the Sun setup assumes that the bootblocks load a kernel image, which then
uses NFS to access the exported root partition, while the OpenBSD bootblocks
use internal NFS routines to load the kernel image directly from the
exported root partition.

Please understand that no one gets this right the first try, since
there is a lot of setup and all the host daemons must be running and
configured correctly.  If you have problems, extract the diskless(8)
manpage, find someone who's been through it before and use the host
syslog and tcpdump(8) to get visibility of what's happening (or not).

Your mvme68k expects to be able to download a second stage bootstrap
program via TFTP after having acquired its IP address through RevARP when
instructed to boot "over the net". It will look for a filename composed of
the machine's IP address followed by the machine's architecture, separated
by a period. For example, a mvme68k board which has been assigned IP
address 130.115.144.11, will make an TFTP request for `8273900B.mvme68k'.
Normally, this file is a symbolic link to an appropriate second-stage
boot program, which should be located in a place where the TFTP daemon
can find it (remember, many TFTP daemons run in a chroot'ed environment).

You can find the boot program in `/usr/mdec/netboot' in the OpenBSD/mvme68k
distribution.

After the boot program has been loaded into memory and given control by
the BUG, it starts locating the machine's remote root directory through
the BOOTPARAM protocol. First a BOOTPARAM WHOAMI request is broadcast
on the local net. The answer to this request (if it comes in) contains
the client's name. This name is used in next step, a BOOTPARAM GETFILE
request -- sent to the server that responded to the WHOAMI request --
requesting the name and address of the machine that will serve the client's
root directory, as well as the path of the client's root on that server.

Finally, this information (if it comes in) is used to issue a REMOTE MOUNT
request to the client's root filesystem server, asking for an NFS file
handle corresponding to the root filesystem. If successful, the boot
program starts reading from the remote root filesystem in search of the
kernel which is then read into memory.

Unpack `base30.tgz' and `etc30.tgz' on the server in the root directory
for your target machine. If you elect to use a separately NFS-mounted
filesystem for `/usr' with your diskless setup, make sure the "./usr" base
files in base30.tgz end up in the correct location. One way to do this is
to temporarily use a loopback mount on the server, re-routing <root>/usr to
your server's exported OpenBSD "/usr" directory. Also put the kernel and
the install/upgrade scripts into the root directory.

A few configuration files need to be edited:

	<root>/etc/hosts
		Add the IP addresses of both server and client.

	<root>/etc/myname
		This files contains the client's hostname; use the same
		name as in <root>/etc/hosts.

	<root>/etc/fstab
		Enter the entries for the remotely mounted filesystems.
		For example:
			server:/export/root/client       /     nfs  rw 0 0
			server:/export/exec/mvme68k.OpenBSD /usr  nfs  rw 0 0

Now you must populate the the `/dev' directory for your client. If you server
runs SunOS 4.x, you can simply change your working directory to `<root>/dev'
and run the MAKEDEV script: `sh MAKEDEV all'.

On SunOS 5.x systems, MAKEDEV can also be used, but there'll be error
messages about unknown user and groups. These errors are inconsequential
for the purpose of installing OpenBSD. However, you may want to correct them
if you plan to the diskless setup regularly. In that case, you may re-run
MAKEDEV on your OpenBSD machine once it has booted.



Upgrading a previously-installed OpenBSD System:
------------------------------------------------

To upgrade OpenBSD 3.0 from a previous version, start with the general
instructions in the section "Installing OpenBSD".

Boot from an installation tape, or the miniroot over the network.
When prompted, select the (U)pgrade option rather than the (I)nstall
option at the prompt in the install process.

The upgrade script will ask you for the existing root partition, and
will use the existing filesystems defined in /etc/fstab to install the
new system in.  It will also use your existing network parameters.

From then, the upgrade procedure is very close to the installation
procedure described earlier in this document.  Note that the upgrade
procedure will not let you pick the ``etc30.tgz'' set, so as to
preserve your files in `/etc' which you are likely to have customized
since a previous installation.

However, it is strongly advised that you unpack the etc30.tgz set in
a temporary directory and merge changes by hand, since all components of
your system may not function correctly until your files in `/etc' are
updated.



Getting source code for your OpenBSD System:
--------------------------------------------

Now that your OpenBSD system is up and running, you probably want to get
access to source code so that you can recompile pieces of the system.

A few methods are provided.  If you have an OpenBSD CD, the source code
is provided.  Otherwise, you can get the pieces over the Internet using
ANONCVS, CTM or FTP.  For more information, see

	http://www.openbsd.org/anoncvs.html
	http://www.openbsd.org/ctm.html
	http://www.openbsd.org/ftp.html


Using online OpenBSD documentation:
-----------------------------------

Documentation is available if you first install the manual
distribution set.  Traditionally, the UN*X "man pages" (documentation)
are denoted by 'name(section)'.  Some examples of this are

	intro(1),
	man(1),
	apropos(1),
	passwd(1), and
	passwd(5).

The section numbers group the topics into several categories, but three
are of primary interest: user commands are in section 1, file formats
are in section 5, and administrative information is in section 8.

The 'man' command is used to view the documentation on a topic, and is
started by entering 'man [section] topic'.  The brackets [] around the
section should not be entered, but rather indicate that the section is
optional.  If you don't ask for a particular section, the topic with the
least-numbered section name will be displayed.  For instance, after
logging in, enter 

	man passwd

to read the documentation for passwd(1).  To view the documentation for
passwd(5), enter

	man 5 passwd

instead.

If you are unsure of what man page you are looking for, enter

	apropos subject-word

where "subject-word" is your topic of interest; a list of possibly 
related man pages will be displayed.


Adding third party software; ``packages'' and ``ports'':
-------------------------------------------------------

As complete as your OpenBSD system is, you may want to add any of several
excellent third party software applications.  There are several ways to do
this.  You can:

1) Obtain the source code and build the application based
   upon whatever installation procedures are provided with the
   application.

2) Use the OpenBSD ``ports'' collection to automatically get any
   needed source file, apply any required patches, create the
   application, and install it for you.

3) Use the OpenBSD ``package'' collection to grab a pre-compiled
   and tested version of the application for your hardware.

If you purchased the OpenBSD CD-ROM set you already have several popular
``packages'', and the ``ports'' collection.

Instructions for installing applications from the various sources using
the different installation methods follow.  If emacs is to be installed
it should be installed first as it creates the ``info'' directory file
that may be modified by other applications.

You should also refer to the packages(7) manual page.

Installing applications from the CD-ROM package collection:

	The OpenBSD CD-ROM ships with several applications pre-built
	for various hardware architectures.  The number of applications
	vary according to available disk space.  Check the directory
	3.0/packages/m68k to see which packages are available for
	your hardware architecture.  That directory will be on the same
	CD-ROM containing the OS installation files for your architecture.

	To install one or more of these packages you must:
	1) become the superuser (root).
	2) mount the appropriate CD-ROM.
	3) use the ``pkg_add'' command to install the software.

	Example (in which we use su(1) to get superuser privileges, thus
	you have to be in group "wheel", see the manual page for su(1)).

    $ su
    Password: <enter your root password>
    # mkdir -p /cdrom
    # mount /dev/cd0a /cdrom
    # pkg_add /cdrom/OSREV/packages/MACHINE_ARCH/<package-name>
    # <add more packages if desired>
    # umount /cdrom
	
	Package names are usually the application name and version
	with .tgz appended, e.g. emacs-20.7.tgz

Installing applications from the ftp.openbsd.org package collection:

	All available packages for your architecture have been placed on
	ftp.openbsd.org in the directory pub/OpenBSD/3.0/packages/m68k/
	You may want to peruse this to see what packages are available.  The
	packages are also on the OpenBSD FTP mirror sites.  See

		http://www.openbsd.org/ftp.html

	for a list of current ftp mirror sites.

	Installation of a package is very easy.
	1) become the superuser (root)
	2) use the ``pkg_add'' command to install the software

	``pkg_add'' is smart enough to know how to download the software
	from the OpenBSD ftp server.  Example:

    $ su
    Password: <enter your root password>
    # pkg_add \
      ftp://ftp.openbsd.org/pub/OpenBSD/3.0/packages/m68k/emacs-20.7.tgz

	Packages available include (at least):

	9menu-1.5.tgz				9wm-1.2pre.tgz
	ADMfzap-0.1.tgz				ADMsmb-0.2.tgz
	Business-CreditCard-0.21.tgz		GConf-1.0.1.tgz
	ImageMagick-5.2.9.tgz			ORBit-0.5.8.tgz
	R-1.2.2.tgz				STk-3.1.1.tgz
	TclXML-1.2.1.tgz			Tktable-2.7.tgz
	Wnn-data-4.2.tgz			Wnn-xwnmo-4.2.tgz
	XPostitPlus-2.3.tgz			Xaw3d-1.5.tgz
	a2ps-4.13b-a4.tgz			a2ps-4.13b-letter.tgz
	aalib-1.2-no_x11.tgz			aalib-1.2.tgz
	abook-0.4.13.tgz			abs-0.8.tgz
	abuse-2.0.tgz				ac3dec-0.6.1.tgz
	adcomplain-3.52.tgz			aescrypt-0.7.tgz
	aewm-1.1.2.tgz				afm-1.0.tgz
	afterstep-1.8.9.tgz			aggregate-1.3.tgz
	agrep-2.04.tgz				aide-0.7.tgz
	amanda-2.4.2.2.tgz			amanda-client-2.4.2.2.tgz
	amaya-5.1-motif.tgz			amaya-english-dict-19961207.tgz
	amaya-french-dict-19961217.tgz		amph-0.8.9.tgz
	an-0.93.tgz				analog-5.03.tgz
	angband-2.9.3-no_x11.tgz		angband-2.9.3.tgz
	angst-0.4b.tgz				antiword-0.31.tgz
	apc-upsd-19991128.tgz			apg-1.2.13.tgz
	arc-5.21e.tgz				archie-1.4.1.tgz
	ari-yahoo-1.7.tgz			arirang-1.6beta.tgz
	arpcatch-19970824.tgz			arping-1.01.tgz
	arpwatch-2.1a11.tgz			asapm-2.9.tgz
	ascd-0.13.2.tgz				
	asclock-2.0.12-classic-english.tgz	asfiles-1.0.tgz
	asmail-0.56.tgz				asp2php-0.75.22-no_x11.tgz
	asp2php-0.75.22.tgz			aspell-0.33.7.tgz
	aspell-danish-0.33.7.tgz		aspell-dutch-0.33.7.tgz
	aspell-french-0.33.7.tgz		aspell-swedish-0.33.7.tgz
	ast-ksh-20010704.0000.tgz		astime-2.8.tgz
	astrolog-5.30.tgz			astyle-1.14.1.tgz
	aterm-0.4.0.tgz				atlas-0.4.3.1.tgz
	aub-2.0.5.tgz				august-0.63b.tgz
	aumix-2.7.tgz				autobook-1.2.tgz
	autoconf-2.13.tgz			automake-1.4-p5.tgz
	axe-6.1.2.tgz				axyftp-0.5.1p1.tgz
	baekmuk-fonts-2.0.tgz			balance-2.28.tgz
	base64-1.0.tgz				bash-1.14.7p1-static.tgz
	bash-1.14.7p1.tgz			bash-2.05-static.tgz
	bash-2.05.tgz				bbdate-0.2.1.tgz
	bbkeys-0.3.6-qt.tgz			bbkeys-0.3.6.tgz
	bbpager-0.3.0.tgz			bclock-1.0.tgz
	beav-1.40.13.tgz			bfbtester-2.0.1.tgz
	bibelot-0.9.4.tgz			bibview-2.2.tgz
	bind-9.1.3.tgz				bing-1.0.4.tgz
	bison-1.28.tgz				bitchx-1.0c17p1.tgz
	bk2site-1.1.5.tgz			blackbox-0.61.1.tgz
	bladeenc-0.94.2.tgz			blast-1.0.tgz
	bluefish-0.6.tgz			bnc-2.8.4.tgz
	bnetd-0.4.19.tgz			bochs-1.2.1-debug.tgz
	bochs-1.2.1.tgz				boehm-gc-4.12.tgz
	bonk-0.5.tgz				bonnie-1.0.tgz
	bounix-1.21.tgz				bpl+-1.0.tgz
	bricons-3.0.tgz				brs-4.00l1.tgz
	btoa-5.2.1.tgz				bubblemon-1.0.5.tgz
	bubblemon-dockapp-1.4.tgz		buffer-1.17.1.tgz
	bulk_mailer-1.13.tgz			burgerspace-1.5.tgz
	bvi-1.3.0.tgz				bzip-0.21.tgz
	bzip2-1.0.1.tgz				c-client-4.40p1.tgz
	c2html-0.9.2.tgz			calc-2.11.1t3.0.tgz
	calentool-2.3.tgz			cannadict-3.5b2.tgz
	cannalib-3.5b2p1.tgz			cannaserver-3.5b2.tgz
	catdoc-0.90.3.tgz			cbb-0.73.tgz
	cdparanoia-3.a9.7p2.tgz			cdrchive-1.0.1.tgz
	cdrdao-1.1.5.tgz			cdrecord-1.9.tgz
	centericq-3.35.22.tgz			cfs-1.3.3.tgz
	cgicc-3.1.5.tgz				cgichk-3.6.tgz
	cgiparse-0.9b.tgz			cgoban-1.9.11.tgz
	chrootuid-1.2.tgz			cidr-2.3.tgz
	clisp-2.27.tgz				clo++-0.3.0.tgz
	clog-1.6.tgz				cmail-3.1.tgz
	common-1.0.6.tgz			compface-1.0.tgz
	conserver-5.21.tgz			contool-3.3a.tgz
	control-center-1.4.0.1.tgz		cook-2.17.tgz
	cooledit-3.17.2-python.tgz		cooledit-3.17.2.tgz
	cops-1.04.tgz				coq-7.0.tgz
	corkscrew-2.0.tgz			courier-imap-1.3.11-ldap.tgz
	courier-imap-1.3.11-mysql.tgz		courier-imap-1.3.11.tgz
	courier-pop3-1.3.11-ldap.tgz		courier-pop3-1.3.11-mysql.tgz
	courier-pop3-1.3.11.tgz			courtney-1.3.tgz
	cqcam-0.91.tgz				crack-5.0.tgz
	crank-0.1.4.tgz				crawl-0.1b.tgz
	cscope-15.3.tgz				ctm-19960528.tgz
	ctrace-0.8.tgz				ctwm-3.5.2.tgz
	cucipop-1.31.tgz			curl-7.9-kerberos.tgz
	curl-7.9.tgz				cvs2cl-2.30.tgz
	cvsup-16.1e-no_x11-static.tgz		cvsup-16.1e-no_x11.tgz
	cvsup-16.1e-static.tgz			cvsup-16.1e.tgz
	cvsupd-16.1e-no_x11-static.tgz		cvsupd-16.1e-no_x11.tgz
	cvsupd-16.1e-static.tgz			cvsupd-16.1e.tgz
	cvsweb-1.112.1.82.tgz			cyrproxy-1.4.2.tgz
	cyrus-sasl-1.5.24.tgz			d1489-1.4.tgz
	dante-1.1.10.tgz			db-3.1.17.tgz
	dclock-pl4.tgz				ddd-3.2.1.tgz
	deco-3.8.3.tgz				decss-0.0.6.tgz
	dejagnu-1.3.tgz				dejagnu-19990614.tgz
	dejasearch-1.9.0.tgz			delay-1.4.tgz
	despoof-0.9.tgz				dgpsip-1.32.tgz
	dia-0.88.1.tgz				dialog-0.6z.tgz
	disc-cover-1.2.2.tgz			dlint-1.4.0.tgz
	doc++-3.4.8.tgz				doc-2.2.3.tgz
	docbook-4.1.2.tgz			docbook-dsssl-1.72.tgz
	dopewars-1.4.8.tgz			dsniff-2.3.tgz
	dumpmpeg-0.6.tgz			dvipdfm-0.13.2b.tgz
	dxpc-3.8.0.tgz				eboard-0.3.3.tgz
	ectags-5.0.1.tgz			efax-0.9.tgz
	electricfence-2.0.5.tgz			elm-2.4ME+66.tgz
	elvis-2.1.4-no_x11.tgz			elvis-2.1.4.tgz
	emacs-20.7-no_x11.tgz			emacs-20.7.tgz
	emacs-leim-20.7.tgz			emiclock-2.0.2.tgz
	enjoympeg-0.4.1.tgz			enlightenment-0.16.5.tgz
	enscript-1.6.1.tgz			epic4-1.0.1.tgz
	erlang-47.4.0.tgz			es-0.9b1.tgz
	esound-0.2.22.tgz			eterm-0.8.10-kanji.tgz
	eterm-0.8.10.tgz			ethereal-0.8.19-no_x11.tgz
	ethereal-0.8.19.tgz			ettercap-0.6.0.tgz
	everybuddy-0.2.1beta6.tgz		exim-3.33-ldap.tgz
	exim-3.33-mysql.tgz			exim-3.33-no_x11-ldap.tgz
	exim-3.33-no_x11-mysql-postgresql-ldap.tgz
	exim-3.33-no_x11-mysql.tgz		exim-3.33-no_x11-postgresql.tgz
	exim-3.33-no_x11.tgz			exim-3.33-postgresql.tgz
	exim-3.33.tgz				expat-1.95.1.tgz
	expect-5.32.1.tgz			explorer-0.72.tgz
	faces-1.6.1.tgz				falconseye-1.9.3.tgz
	fastjar-0.90.tgz			fetchmail-5.9.0-kerberos4.tgz
	fetchmail-5.9.0.tgz			fftw-2.1.3.tgz
	figlet-2.2.tgz				fileutils-4.1.tgz
	findutils-4.1.tgz			fire-1.0.tgz
	firewalk-0.8.tgz			flac-1.0.tgz
	flash-0.4.10.tgz			flawfinder-0.15.tgz
	fleditor-0.4.2.tgz			flow-tools-0.55.tgz
	fltk-1.0.11.tgz				flvw-1.0.tgz
	flwm-1.0.0.tgz				fnlib-0.5.tgz
	fping-1.20.tgz				fragrouter-1.6.tgz
	freebsd_lib-4.0.tgz			freeciv-1.12.0-gtk.tgz
	freeciv-1.12.0.tgz			freefonts-0.10.tgz
	freetds-0.52.tgz			freetype-1.3.1.tgz
	freetype-doc-1.3.1.tgz			freeze-2.5.tgz
	frodo-4.1b.tgz				frotz-2.32.tgz
	fsv-0.9.tgz				ftpcopy-0.3.9.tgz
	fvicons-2.4.2.tgz			fvwm2+fvicons-2.4.2-i18n.tgz
	fvwm2+fvicons-2.4.2.tgz			fvwm2-2.4.2-i18n.tgz
	fvwm2-2.4.2.tgz				fvwm95-2.0.43a.tgz
	gacc-0.7.5.tgz				gaim-0.45-esd.tgz
	gaim-0.45.tgz				gcc-3.0.1-c++.tgz
	gcc-3.0.1-core.tgz			gcc-3.0.1-g77.tgz
	gcc-3.0.1-objc.tgz			gcpio-2.4.2.tgz
	gd-1.8.3-no_x11.tgz			gd-1.8.3.tgz
	gdbm-1.8.0.tgz				gdk-pixbuf-0.10.1-gnome.tgz
	gdk-pixbuf-0.10.1.tgz			geg-1.0.2.tgz
	gemdropx-0.7.tgz			gengameng-3.0.tgz
	gettext-0.10.40.tgz			ghostscript-6.51-a4.tgz
	ghostscript-6.51.tgz			ghostscript-7.00-a4.tgz
	ghostscript-7.00.tgz			ghostview-1.5.tgz
	gif2png-2.4.2.tgz			giflib-4.1.0-no_x11.tgz
	giflib-4.1.0.tgz			gifsicle-1.27.tgz
	giftrans-1.12.tgz			gimp-1.2.2.tgz
	gkrellkam-0.2.3b.tgz			gkrellm-1.2.2.tgz
	gkrellm-reminder-0.3.1.tgz		gkrellm-volume-0.8.tgz
	gkrellmms-0.5.5.tgz			gkrellmss-0.2.tgz
	gkrellstock-0.2.tgz			gkrellweather-0.2.7.tgz
	glade-0.5.11-gnome.tgz			glade-0.5.11.tgz
	gle-3.0.4.tgz				glib-1.2.10.tgz
	glimpse-4.1.tgz				glut-3.7.tgz
	gmake-3.79.1.tgz			gmp-3.1.1.tgz
	gnats-3.113.tgz				gnome-applets-1.4.0.1.tgz
	gnome-core-1.4.0.4.tgz			gnome-libs-1.2.13.tgz
	gnome-users-guide-1.2.tgz		gnome-vfs-1.0.1.tgz
	gnomeicu-0.96.1.tgz			gnuchess-4.0.80.tgz
	gnugo-3.0.0.tgz				gnuls-4.1.tgz
	gnushogi-1.2.3.tgz			gnut-0.4.27.tgz
	gofer-2.30a.tgz				gogo-2.26a.tgz
	gone-1.3.2a.tgz				gpa-0.4.2.tgz
	gperf-2.7.2.tgz				gpgme-0.2.2.tgz
	gphoto-0.4.3.tgz			gq-0.4.0.tgz
	gqmpeg-0.9.0.tgz			gqview-0.8.2.tgz
	grace-5.1.4.tgz				gracula-3.0.tgz
	graphviz-1.7.6.tgz			grepmail-4.51.tgz
	grip-2.95p1.tgz				grpn-1.1.1.tgz
	gsl-0.6.tgz				gsm-1.0.10.tgz
	gtar-1.13.23-static.tgz			gtar-1.13.23.tgz
	gtk+-1.2.10p1.tgz			gtk-engines-0.12.tgz
	gtk-gnutella-0.12.tgz			gtkballs-1.04.tgz
	gtkglarea-1.2.2.tgz			gtkmm-1.2.1.tgz
	gtkpool-0.3.4.tgz			gtksee-0.5.0.tgz
	gtop-1.0.13.tgz				gtypist-2.3.2.tgz
	guavac-1.2.tgz				guile-1.4.tgz
	guilib-1.1.0.tgz			gv-3.5.8.tgz
	ha-0.999b.tgz				hackdata-3.3.1.tgz
	hanterm-fonts-3.1.tgz			hanterm-xf-p19.tgz
	help2man-1.24.tgz			heroes-0.12-sdl.tgz
	hevea-1.05.tgz				hexcalc-19951219.tgz
	hexedit-1.2.1.tgz			hlfl-0.52.tgz
	hnb-1.8.1.tgz				hoc-1.1.tgz
	hping-2.0b54.tgz			html2wml-0.4.6.tgz
	htmldoc-1.8.11.tgz			http_load-20010405.tgz
	http_ping-20010709.tgz			httptunnel-3.0.5.tgz
	hydra-1.3.tgz				hypermail-2.1.2-gdbm.tgz
	hypermail-2.1.2.tgz			icb-5.0.9p1.tgz
	icebreaker-1.2.1.tgz			icecast-1.3.11.tgz
	icewm-1.0.7.7.tgz			icmpinfo-1.11.tgz
	icon-compiler-9.4-no_x11.tgz		icon-compiler-9.4.tgz
	icon-interp-9.4-no_x11.tgz		icon-interp-9.4.tgz
	icon-lib-9.4-no_x11.tgz			icon-lib-9.4.tgz
	id-utils-3.2d.tgz			id3ed-1.10.2.tgz
	idiff-1.0.tgz				idled-1.16.tgz
	imap-uw-2001.313.tgz			imaputils-uw-20001219.tgz
	imlib-1.9.8.1.tgz			imm-3.5a1.tgz
	impress-1.1b9.tgz			indent-2.2.6.tgz
	indexpage-1.0.2.tgz			ines-1.2.tgz
	info2html-1.1.tgz			iodbc-2.50.3.tgz
	ion-20010523.tgz			iozone-3.56.tgz
	ipcheck-0.116.tgz			iperf-1.1.1.tgz
	ipfm-0.10.4.tgz				iplog-2.2.3.tgz
	irc-2.10.3p1.tgz			ircii-4.4Z.tgz
	irssi-0.7.98.3.tgz			isearch-1.14.tgz
	ish-1.11.tgz				isic-0.05.tgz
	isilo-2.58.tgz				iso12083-1993.tgz
	iso8879-1986.tgz			ispell-3.1.20.tgz
	ispell-french-3.1.20.tgz		ispell-german-3.1.20.tgz
	ispell-russian-3.1.20.tgz		ispell-swedish-3.1.20.tgz
	isync-0.5.tgz				iview-1.4.tgz
	ja-Wnn-4.2.tgz				ja-Wnndict-4.2.tgz
	ja-fonts-funet-19911117.tgz		ja-fonts-gnu-1.2.tgz
	ja-groff-1.10_0.99.tgz			ja-jvim-2.0r-canna.tgz
	ja-jvim-2.0r-wnn-canna.tgz		ja-jvim-2.0r-wnn.tgz
	ja-jvim-2.0r.tgz			ja-kinput2-3.0-canna-wnn.tgz
	ja-kinput2-3.0-canna.tgz		ja-kinput2-3.0-wnn.tgz
	ja-kterm-6.2.0-xaw3d.tgz		ja-kterm-6.2.0.tgz
	ja-less-3.32p2.48.tgz			ja-nkf-1.62.tgz
	ja-onew-canna-2.2.10.tgz		ja-onew-wnn4-2.2.10.tgz
	ja-onew-wnn4-canna-2.2.10.tgz		ja-w3m-0.2.1p3.tgz
	jadetex-3.11.tgz			jakarta-ant-1.3.tgz
	jakarta-servletapi-3.2.2.tgz		jakarta-tomcat-3.2.2.tgz
	jbigkit-1.2.tgz				jday-1.2.tgz
	jed-0.99.14-no_x11.tgz			jed-0.99.14.tgz
	jesred-1.2.1.tgz			jftpgw-0.12.0.tgz
	jikes-1.14.tgz				jlint-2.3.tgz
	joe-2.8p1.tgz				john-1.6-k6.tgz
	john-1.6.tgz				jove-4.16.tgz
	jpeg-6b.tgz				jpilot-0.99p1.tgz
	jserv-3.2.2.tgz				junit-3.7.tgz
	junkbuster-2.0.2.tgz			kaffe-1.0.6.tgz
	kakasi-2.3.1.tgz			kanjips-19900310.tgz
	kbanner-2.tgz				kbiff-3.5.tgz
	kdbg-1.2.2.tgz				kdeartwork-2.2.1.tgz
	kdebase-2.2.1.tgz			kdebase-ns-2.2.1.tgz
	kdegames-2.2.1.tgz			kdegraphics-2.2.1.tgz
	kdelibs-2.2.1.tgz			kdenetwork-2.2.1.tgz
	kdetoys-2.2.1.tgz			kdoc-2.2.1.tgz
	kermit-7.0.197.tgz			klaxon-1.5.tgz
	klone-2.1a.tgz				kmago-1.1.2-wget.tgz
	kmago-1.1.2.tgz				knapster2-0.3.tgz
	ko-Wnn-4.2.tgz				ko-Wnndict-4.2.tgz
	koffice-1.1.tgz				ksmp3play-0.5.1.tgz
	kstars-0.6.tgz				ktail-0.5.1.tgz
	kuickshow-0.8.1.tgz			kxicq2-0.0.6.tgz
	kxmleditor-0.6.tgz			l0phtcrack-2.52.tgz
	lam-6.5.1.tgz				lame-3.89b.tgz
	larswm-7.0.13.tgz			latex2html-97.1.tgz
	lclint-2.5r.tgz				ldistfp-0.1.4.tgz
	leafnode-1.9.19.tgz			lesstif-0.92.6.tgz
	lftp-2.4.4.tgz				lgeneral-0.5.0.tgz
	lgrind-3.64.tgz				lha-1.14f.tgz
	libao-0.8.0.tgz				libao-arts-0.8.0.tgz
	libao-esd-0.8.0.tgz			libart-2.3.3.tgz
	libaudiofile-0.2.2.tgz			libavl-1.4.0.tgz
	libcdaudio-0.99.4.tgz			libdnd-1.1.tgz
	libdockapp-0.4.0.tgz			libevent-0.3d.tgz
	libggi-2.0b3.tgz			libghttp-1.0.9.tgz
	libgii-0.7.tgz				libglade-0.16-gnome.tgz
	libglade-0.16.tgz			libgtop-1.0.12-gnome.tgz
	libgtop-1.0.12.tgz			libiconv-1.7.tgz
	libident-0.22.tgz			libmng-1.0.1.tgz
	libnet-1.0.2a.tgz			libnids-1.16.tgz
	libogg-1.0rc2.tgz			libproplist-0.10.1.tgz
	librep-0.13.4.tgz			libretto-config-1.0b5.tgz
	libsigc++-1.0.3.tgz			libslang-1.4.4.tgz
	libst-1.2.tgz				libtool-1.3.5p3.tgz
	libusb-0.1.3b.tgz			libuta-0.3.40.tgz
	libutf8-0.7.3.tgz			libvorbis-1.0rc2.tgz
	libwmf-0.2.0.tgz			libworkman-1.4.tgz
	libxml-2.4.5.tgz			libxml1-1.8.15.tgz
	libxslt-1.0.4.tgz			licq-0.61.tgz
	lincity-1.11.tgz			lincvs-0.2.3.tgz
	links-0.96.tgz				linleech-2.2.1.tgz
	linuxdoc-1.1.tgz			lmbench-1.1.tgz
	logsurfer-1.5a.tgz			lopster-0.9.8.tgz
	lrzsz-0.12.20.tgz			lsof-4.57B.tgz
	lua-4.0.tgz				lupe-0.08.tgz
	lxnb-0.4.tgz				lzo-1.07.tgz
	lzop-1.00.tgz				m4-1.4.tgz
	mad-0.13.0b.tgz				magicpoint-1.08a.tgz
	mailcrypt-3.5.6-emacs-gnupg.tgz		maildrop-1.3.4.tgz
	mailman-2.0.6-postfix.tgz		mailman-2.0.6.tgz
	malsync-2.0.6.tgz			mastergear-1.4.tgz
	mawk-1.3.3.tgz				mcsim-4.2.0.tgz
	mergemaster-1.25.tgz			metamail-2.7.tgz
	mgdiff-1.0.tgz				mhash-0.8.9.tgz
	mhonarc-2.4.9.tgz			mico-2.3.5.tgz
	micq-0.4.7.tgz				mindterm-1.9.9.tgz
	minicom-1.83.1.tgz			mirror-2.9.tgz
	mixer.app-1.7.0.tgz			mixmaster-2.0.4b45.tgz
	mm-1.1.3.tgz				mmv-1.01b.tgz
	mod_auth_radius-1.5.2.tgz		mod_gzip-1.3.19.1a.tgz
	mod_perl-1.26.tgz			moon-buggy-0.5.1.tgz
	moria-5.5.2.tgz				mosfet-liquid-0.5.1.tgz
	most-4.9.0.tgz				mouseclock-1.0.tgz
	movemail-1.0.tgz			mp3cddb-0.1.tgz
	mp3encode-1.10.tgz			mp3info-0.2.16.tgz
	mpack-1.5.tgz				mpage-2.5-a4.tgz
	mpage-2.5-legal.tgz			mpage-2.5-us_letter.tgz
	mpeg_lib-1.3.1.tgz			mpeg_play-2.4.tgz
	mpegaudio-3.9.tgz			mpg123-0.59r-esd.tgz
	mpg123-0.59r.tgz			mpg321-0.2.0.tgz
	mplex-1.1.tgz				mrtd-2.2.2a.tgz
	mrtg-2.9.12a.tgz			mshell-1.0.tgz
	mtools-3.9.8.20010819.tgz		mtr-0.42.tgz
	mutt-1.2.5i-imap-pop.tgz		mutt-1.2.5i.tgz
	mutt-1.3.21i-imap-pop.tgz		mutt-1.3.21i.tgz
	mxconns-3.1.4.tgz			mysql++-1.7.9.tgz
	mysql++-docs-1.7.9.tgz			mysql-client-3.23.42.tgz
	mysql-server-3.23.42-max.tgz		mysql-server-3.23.42.tgz
	mysql-tests-3.23.42.tgz			mysql2pgsql-20010320.tgz
	mysqlgui-1.7.5.tgz			nam-1.0a8.tgz
	nano-1.0.5-slang.tgz			nano-1.0.5.tgz
	nap-1.4.6.tgz				nasm-0.98.tgz
	nbaudit-1.0.tgz				nbtscan-1.0.2.tgz
	ncftp-3.0.3.tgz				ndiff-0.04.tgz
	nedit-5.1.1.tgz				nemesis-1.32.tgz
	nessus-1.0.7a-no_x11-experimental.tgz	netatalk-990130.tgz
	netcdf-3.5b3.tgz			nethack-3.3.1-no_x11.tgz
	nethack-3.3.1-qt.tgz			nethack-3.3.1.tgz
	netpbm-9.19.tgz				netperf-2.2alpha.tgz
	netpipe-2.4.tgz				netpipes-4.2-export.tgz
	netris-0.5.tgz				newsfetch-1.21.tgz
	newvox-1.0.tgz				nfsshell-1.0.tgz
	ngrep-1.40.tgz				nmap-2.54b25-no_x11.tgz
	nmap-2.54b25.tgz			nmh-1.0.4.tgz
	ns-2.1b6.tgz				nscache-0.6.tgz
	nslint-2.0.2a2-static.tgz		nslint-2.0.2a2.tgz
	nsping-0.8.tgz				nspmod-0.1.tgz
	nte-1.7.0.tgz				ntl-5.1a.tgz
	ntop-1.1.tgz				ntp-4.1.71.tgz
	ntp-doc-4.1.71.tgz			nulib-3.25.tgz
	nut-0.44.2-cgi.tgz			nut-0.44.2.tgz
	nvi-m17n-1.79.19991117-canna.tgz	nvi-m17n-1.79.19991117.tgz
	oaf-0.6.5.tgz				ocaml-3.02.tgz
	octave-2.0.16.tgz			olvwm-4.2.tgz
	omega-0.90.4.tgz			openjade-1.3.tgz
	openldap-client-2.0.15.tgz		openldap-server-2.0.15.tgz
	openmotif-2.1.30.5.tgz			
	openmotif-debuglibs-2.1.30.5.tgz	openmotif-demos-2.1.30.5.tgz
	opennap-0.42.tgz			oproute-0.7.tgz
	otcl-1.0a5.tgz				outguess-0.2.tgz
	p5-AI-NeuralNet-BackProp-0.89.tgz	
	p5-AI-NeuralNet-Mesh-0.44.tgz		p5-AI-Perceptron-0.01.tgz
	p5-Algorithm-Diff-1.11a.tgz		p5-Algorithm-MDiff-0.94.tgz
	p5-Algorithm-MarkovChain-0.03.tgz	
	p5-Algorithm-Permute-0.03.tgz		p5-Apache-MP3-2.19.tgz
	p5-ApacheDBI-0.88.tgz			p5-AsciiDB-TagFile-1.05.tgz
	p5-Attribute-Handlers-0.75.tgz		p5-Audio-CD-0.04.tgz
	p5-Authen-Radius-0.05.tgz		p5-B-Graph-0.51.tgz
	p5-BSD-Resource-1.10.tgz		p5-Blatte-0.9.4.tgz
	p5-Blatte-HTML-0.9.tgz			p5-C-Scan-0.74.tgz
	p5-CDDB-1.03.tgz			p5-CDDB_get-1.66.tgz
	p5-CGI-2.76.tgz				p5-CGI-XMLApplication-0.9.3.tgz
	p5-Chatbot-Eliza-0.97.tgz		p5-Class-Date-1.0.5.tgz
	p5-Class-Loader-2.02.tgz		p5-Class-MethodMaker-1.02.tgz
	p5-Compress-LZO-1.00.tgz		p5-Compress-Zlib-1.14.tgz
	p5-Convert-ASN1-0.13.tgz		p5-Convert-BER-1.31.tgz
	p5-Crypt-Blowfish-2.06.tgz		p5-Crypt-CBC-1.25.tgz
	p5-Crypt-DES-2.03.tgz			p5-Crypt-SSLeay-0.27.tgz
	p5-Crypt-Twofish-1.0.tgz		p5-Curses-1.06.tgz
	p5-Curses-Widgets-1.2.tgz		
	p5-DBD-Msql-Mysql-1.22.16-dbimon.tgz	p5-DBD-Msql-Mysql-1.22.16.tgz
	p5-DBD-Pg-1.01.tgz			p5-DBI-1.20.tgz
	p5-DBIx-XHTML_Table-0.95.tgz		p5-Data-Flow-0.05.tgz
	p5-Data-ShowTable-3.3.tgz		p5-Date-Calc-4.3.tgz
	p5-Date-Handler-0.10.tgz		p5-DateManip-5.40.tgz
	p5-Devel-SmallProf-0.9.tgz		p5-Digest-MD5-2.12.tgz
	p5-File-Tail-0.98.tgz			p5-Finance-Quote-1.05.tgz
	p5-Font-TTF-0.26.tgz			p5-FreezeThaw-0.41.tgz
	p5-GD-1.33-no_x11.tgz			p5-GD-1.33.tgz
	p5-GD-Graph-1.33.tgz			p5-GD-Graph3d-0.55.tgz
	p5-GD-TextUtil-0.80.tgz			p5-GPG-0.06.tgz
	p5-Gateway-0.42.tgz			p5-GnuPG-0.09.tgz
	p5-GnuPG-Interface-0.31.tgz		p5-Graphics-ColorNames-0.30.tgz
	p5-Gtk-0.7008-gtkglarea.tgz		p5-Gtk-0.7008.tgz
	p5-HTML-Base-0.6.tgz			p5-HTML-CGIChecker-0.90.tgz
	p5-HTML-Embperl-1.3.3.tgz		p5-HTML-FromText-1.005.tgz
	p5-HTML-Mason-1.03.tgz			p5-HTML-Parser-3.25.tgz
	p5-HTML-Stream-1.49.tgz			p5-HTML-Table-1.09.tgz
	p5-HTML-TableExtract-1.06.tgz		p5-HTML-Tagset-3.03.tgz
	p5-HTML-Tree-3.11.tgz			p5-HTTP-GHTTP-1.06.tgz
	p5-I18N-Charset-1.12.tgz		p5-I18N-LangTags-0.26.tgz
	p5-IO-String-1.01.tgz			p5-IO-stringy-2.108.tgz
	p5-Image-Info-1.08.tgz			p5-Image-Size-2.93.tgz
	p5-Imager-0.38.tgz			p5-Locale-Codes-1.06.tgz
	p5-Locale-PGetText-0.16.tgz		p5-MD5-1.7.tgz
	p5-MIME-Base64-2.12.tgz			p5-MIME-tools-5.411.tgz
	p5-MLDBM-2.00.tgz			p5-MP3-ID3v1Tag-1.11.tgz
	p5-MP3-Info-0.91.tgz			p5-Mail-Alias-1.12.tgz
	p5-Mail-Box-1.112.tgz			p5-Mail-IMAPClient-2.1.3.tgz
	p5-Mail-POP3Client-2.7.tgz		p5-Mail-Tools-1.15.tgz
	p5-Math-GMP-1.06.tgz			p5-Net-DNS-0.12.tgz
	p5-Net-Daemon-0.35.tgz			p5-Net-IPv4Addr-0.10.tgz
	p5-Net-IRC-0.70.tgz			p5-Net-ParseWhois-0.62.tgz
	p5-Net-Pcap-0.04.tgz			p5-Net-Ping-External-0.06.tgz
	p5-Net-RawIP-0.09d.tgz			p5-Net-SSLeay-1.09.tgz
	p5-Net-Server-0.77.tgz			p5-Net-Traceroute-1.05.tgz
	p5-Net-Whois-1.9.tgz			p5-News-Article-1.13.tgz
	p5-News-Newsrc-1.08.tgz			p5-PGP-Sign-0.16-pgp.tgz
	p5-PGP-Sign-0.16-pgp5.tgz		p5-PGP-Sign-0.16.tgz
	p5-Params-Validate-0.06.tgz		p5-Parse-RecDescent-1.80.tgz
	p5-PlRPC-0.2016.tgz			p5-SQL-Statement-0.1020.tgz
	p5-Set-IntSpan-1.07.tgz			p5-Set-Scalar-1.10.tgz
	p5-Storable-1.0.13.tgz			p5-String-Approx-3.17.tgz
	p5-String-Random-0.198.tgz		p5-String-Similarity-0.02.tgz
	p5-Term-ReadKey-2.14.tgz		p5-Term-ReadLine-Gnu-1.10.tgz
	p5-Test-Simple-0.30.tgz			p5-Text-Iconv-1.2.tgz
	p5-Text-PDF-0.16.tgz			p5-Text-Template-1.31.tgz
	p5-Tie-DBI-0.86.tgz			p5-Time-HiRes-1.20.tgz
	p5-Time-TimeDate-1.10.tgz		p5-Tk-800.023.tgz
	p5-Tk-demo-800.023.tgz			p5-URI-1.17.tgz
	p5-Unicode-Map8-0.10.tgz		p5-Unicode-String-2.06.tgz
	p5-WML-Card-0.02.tgz			p5-XML-DOM-1.25.tgz
	p5-XML-LibXML-1.00.tgz			p5-XML-LibXSLT-1.09.tgz
	p5-XML-Parser-2.30.tgz			p5-XML-RSS-0.97.tgz
	p5-XML-Sablotron-0.65.tgz		p5-XML-Simple-1.05.tgz
	p5-XML-Writer-0.4.tgz			p5-XML-XPath-1.08.tgz
	p5-XML-XSLT-0.32.tgz			p5-libnet-1.0703.tgz
	p5-libwww-5.53.tgz			p5-sdf-2.001.tgz
	p5-sybperl-2.13.tgz			palm-bookmarks-0.2.tgz
	palmpower-1.0.2.tgz			par-1.52.tgz
	paragui-0.7.2.tgz			pcapmerge-1.0.tgz
	pccts-1.33r29.tgz			pchar-1.4.tgz
	pcre-3.4.tgz				pdflib-4.0.1.tgz
	pdmenu-1.2.65.tgz			pdnsd-1.1.6.tgz
	perltidy-20010328.tgz			pgp-2.6.3.tgz
	pgp-5.0i.tgz				pgpdump-0.11.tgz
	php3-3.0.18-gd.tgz			php3-3.0.18-imap-gd-mysql.tgz
	php3-3.0.18-imap-gd-postgresql.tgz	php3-3.0.18-imap-mysql.tgz
	php3-3.0.18-imap-postgresql.tgz		php3-3.0.18-imap.tgz
	php3-3.0.18-mysql.tgz			php3-3.0.18-postgresql.tgz
	php3-3.0.18.tgz				php4-4.0.6p1-gd-pdflib.tgz
	php4-4.0.6p1-gd.tgz			php4-4.0.6p1-gettext.tgz
	php4-4.0.6p1-imap-ldap-mysql.tgz	
	php4-4.0.6p1-imap-ldap-no_x11-mysql.tgz 
	php4-4.0.6p1-imap-ldap-no_x11-postgresql.tgz
	php4-4.0.6p1-imap-ldap-postgresql.tgz	php4-4.0.6p1-imap-mysql.tgz
	php4-4.0.6p1-imap-no_x11-mysql.tgz	
	php4-4.0.6p1-imap-no_x11-postgresql.tgz 
	php4-4.0.6p1-imap-postgresql.tgz	php4-4.0.6p1-imap.tgz
	php4-4.0.6p1-ldap.tgz			php4-4.0.6p1-mysql.tgz
	php4-4.0.6p1-no_x11.tgz			php4-4.0.6p1-postgresql.tgz
	php4-4.0.6p1-snmp.tgz			php4-4.0.6p1.tgz
	php4-pear-4.0.6p1.tgz			pi-address-0.4.0.tgz
	pico-4.1.tgz				piewm-1.03.tgz
	pilot-link-0.9.3.tgz			pilrc-2.8p5-no_x11.tgz
	pilrc-2.8p5.tgz				pine+pico-4.40p1.tgz
	pine-4.40p1.tgz				plan-1.6.1.tgz
	plor-0.3.2.tgz				pm3-1.1.15.tgz
	png-1.0.12.tgz				pngcrush-1.5.6.tgz
	pop3gwd-1.2.tgz				popclient-3.0b6.tgz
	poppy-3.1.tgz				popt-1.5.1.tgz
	portscanner-1.0.tgz			portsentry-1.0.tgz
	postfix-20010228.pl05-ldap.tgz		postfix-20010228.pl05-mysql.tgz
	postfix-20010228.pl05-pcre.tgz		postfix-20010228.pl05.tgz
	postfix-snapshot-20011008.tgz		postgresql-7.1.3-odbc.tgz
	postgresql-7.1.3-tcl-odbc.tgz		postgresql-7.1.3-tcl.tgz
	postgresql-7.1.3.tgz			
	postgresql-clients-7.1.3-odbc.tgz	
	postgresql-clients-7.1.3-tcl-odbc.tgz	
	postgresql-clients-7.1.3-tcl.tgz	postgresql-clients-7.1.3.tgz
	postgresql-docs-7.1.3.tgz		povray-3.1g-no_x11.tgz
	povray-3.1g.tgz				ppgen-1.0.tgz
	ppmtoTbmp-1.1.tgz			pptp-1.0.2.tgz
	prc-tools-0.5.0.tgz			prepop-0.1b7.tgz
	procmail-3.21.tgz			proxy-suite-1.7.tgz
	pspell-0.12.2.tgz			pstree-2.16.tgz
	psutils-1.17-a4.tgz			pth-1.4.0p1.tgz
	pwm-1.0.tgz				py-Chart-1.10.tgz
	py-Checker-0.8.4.tgz			py-Gtk-1.4.1-gnome.tgz
	py-Gtk-1.4.1.tgz			py-Imaging-1.1.2.tgz
	py-gnupg-0.3.0.tgz			py-libpcap-0.2.tgz
	py-mxDateTime-2.0.2.tgz			py-mysql-0.9.1c1.tgz
	py-psycopg-0.99.6-zope.tgz		py-psycopg-0.99.6.tgz
	py-sslwrapper-0.5.tgz			py-unit-1.4.1-no_x11.tgz
	py-unit-1.4.1.tgz			py-xml-0.6.6.tgz
	python-1.5.2-threads.tgz		python-1.5.2-tk-threads.tgz
	python-1.5.2-tk.tgz			python-1.5.2.tgz
	python-2.1.1-threads.tgz		python-2.1.1-tk-threads.tgz
	python-2.1.1-tk.tgz			python-2.1.1.tgz
	python-tools-1.5.2.tgz			python-tools-2.1.1.tgz
	qcad-1.4.7.tgz				qhacc-0.6.1a.tgz
	qiv-1.7.tgz				qlwm-1.7.tgz
	qt-designer-2.3.1.tgz			qt2-3.1.tgz
	qt2-examples-3.1.tgz			qt2-html-3.1.tgz
	quake-20000101-ggi.tgz			quake-20000101-sdl.tgz
	quake-20000101.tgz			quakeworld-server-20000101.tgz
	queso-980922.tgz			quirc-0.9.82.tgz
	qvwm-1.1.8-esound-imlib.tgz		qvwm-1.1.8-esound.tgz
	qvwm-1.1.8-imlib.tgz			qvwm-1.1.8.tgz
	r5rs-19980421.tgz			radiusd-cistron-1.6.4.tgz
	radiusd-lucent-2.1p1.tgz		radiusniff-0.2.tgz
	radiusreport-0.3b6.tgz			rain-1.2.8.tgz
	rat-3.0.33.tgz				rats-1.1.tgz
	rc-1.6-editline.tgz			rc-1.6-readline.tgz
	rc-1.6.tgz				rclock-2.7.6.tgz
	rdesktop-1.0.0.p19.7.4.tgz		rdp-1.0.tgz
	recode-3.6.tgz				redhat_base-6.2p2.tgz
	redhat_motif-2.1.30.tgz			relate-2.0.tgz
	remind-3.0.22.tgz			rep-gtk-0.15.tgz
	rio500-0.7.tgz				rman-3.0.9.tgz
	root-tail-0.0.10.tgz			roxirc-1.72.tgz
	rplay-3.3.2.tgz				rpm-3.0.6p1.tgz
	rpm2cpio-1.1.tgz			rrdtool-1.0.33-tcl.tgz
	rrdtool-1.0.33.tgz			rsync-2.4.6.tgz
	rsynth-2.0.tgz				rtty-3.2.tgz
	ruby-1.6.2.tgz				rxp-1.2.3.tgz
	rxvt-2.7.6p1.tgz			s10sh-0.2.0.tgz
	sablotron-0.65.tgz			safecat-1.8.tgz
	sam-4.3.19980506.tgz			samba-2.2.1a.tgz
	sash-3.4.tgz				sattrack-3.1.6.tgz
	sawfish-0.36.tgz			sc-6.21.tgz
	scanlogd-2.2.tgz			scanssh-1.55.tgz
	scm-5d3-no_x11.tgz			scm-5d3.tgz
	screen-3.9.10.tgz			scrollkeeper-0.2.tgz
	scsh-0.5.3.tgz				sdd-1.31.tgz
	sdl-1.2.2-esd.tgz			sdl-1.2.2-sun.tgz
	sdl-image-1.2.0.tgz			sdl-mixer-1.2.0.tgz
	sdl-net-1.2.2.tgz			sdl-ttf-2.0.3.tgz
	sdlmm-0.1.8.tgz				sdlroids-1.3.4.tgz
	sdlzombies-1.0.0.tgz			sdr-2.7e.tgz
	sentinel-0.8.tgz			setquota-0.1.tgz
	seyon-2.14b.tgz				sgmlformat-1.7.tgz
	sh-utils-2.0.tgz			sharity-light-1.2.tgz
	sharutils-4.2.1.tgz			shash-0.2.4-static.tgz
	shash-0.2.4.tgz				shorten-3.3.tgz
	shtool-1.5.4.tgz			simh-2.3d.tgz
	sing-1.1.tgz				siphon-0.666.tgz
	sirc-2.211.tgz				skill-4.0.tgz
	slash-3.2.2-e8-no_x11.tgz		slash-3.2.2-e8.tgz
	slash-em-3.3.1.6e4f5-no_x11.tgz		slash-em-3.3.1.6e4f5.tgz
	slib-2c9.tgz				sliderule-1.0.tgz
	slirp-1.0c.tgz				slrn-0.9.7.2p2.tgz
	slurpie-2.0b.tgz			smbsniff-0.0.1b.tgz
	smpeg-0.4.4.tgz				smtpclient-1.0.0.tgz
	smurflog-2.1.tgz			snes9x-1.37c.tgz
	sniffit-0.3.7b.tgz			snort-1.8.1.tgz
	socket-1.1.tgz				solid-pop3d-0.15.tgz
	solid-pop3d-0.15p1-apop.tgz		source-highlight-1.1.tgz
	sox-12.17.tgz				sp-1.2.1.tgz
	speak_freely-7.1.tgz			speyes-1.2.0.tgz
	spice-3f5.tgz				spider-1.1.tgz
	spiff-1.0.tgz				spim-6.3.tgz
	splitvt-1.6.3.tgz			sqsh-1.7.tgz
	squeak-3.0.pre2.tgz			squid-2.3.tgz
	ssldump-0.9b1p1.tgz			star-1.3-static.tgz
	star-1.3.tgz				starlanes-1.2.2.tgz
	stat-1.3.tgz				stel-19960505.tgz
	strobe-1.06.tgz				stunnel-3.20.tgz
	surfraw-1.0.3.tgz			swatch-3.0.1.tgz
	swig-1.3.6.tgz				swig-examples-1.3.6.tgz
	swisswatch-0.06.tgz			sylpheed-0.6.2.tgz
	synaesthesia-2.1-esd.tgz		t1lib-1.2.tgz
	tacacs+-4.0.4a.tgz			tcl-8.0.5.tgz
	tcl-8.3.3.tgz				tclcl-1.0b9.tgz
	tcpblast-1.0.tgz			tcpflow-0.12.tgz
	tcplist-2.2.tgz				tcpreplay-1.0.1.tgz
	tcpshow-1.74.tgz			tcpstat-1.4.tgz
	tcptraceroute-1.2.tgz			tcs-19950325.tgz
	tcsh-6.10.00-static.tgz			tcsh-6.10.00.tgz
	teTeX_base-1.0.7.tgz			teTeX_texmf-1.0.2.tgz
	ted-2.10.tgz				teknap-1.3g.tgz
	tempest-1.0.4.tgz			tempwatch-1.0.tgz
	texi2html-1.64.tgz			textutils-2.0.tgz
	tgif-4.1.40.tgz				thcrut-0.1.tgz
	thttpd-2.21b.tgz			tidy-4aug00.tgz
	tiff-3.5.5.tgz				tiff2png-0.81.tgz
	tightvnc-1.2.0-viewer.tgz		tightvnc-1.2.0.tgz
	tin-1.4.5-nntp_only.tgz			tin-1.4.5.tgz
	tintin-1.5.6.tgz			tinyfugue-4.0s1.tgz
	tk-8.0.5.tgz				tk-8.3.3.tgz
	tkcron-2.12.tgz				tkcvs-6.0.tgz
	tkinfo-2.5.tgz				tkirc2.46.tgz
	tkman-2.1.tgz				tkrat-2.0.3.tgz
	tnef-1.0.1.tgz				tosha-0.6.tgz
	totd-1.2.tgz				tracker-5.3.tgz
	trafd-3.0.1.tgz				trafshow-3.1.tgz
	trans-1.20.tgz				transfig-3.2.3d.tgz
	trn-4.0.76.tgz				ttcp-1.12.tgz
	ttmkfdir-0.0.tgz			ttyrec-1.0.2.tgz
	tvtwm-pl11.tgz				ubh-2.1.tgz
	ucd-snmp-4.2.1.tgz			ucspi-unix-0.34.tgz
	udptunnel-1.1.tgz			uemacs-4.0.tgz
	unace-1.2b.tgz				unarj-2.43.tgz
	unclutter-8.tgz				unicon-10.0beta.tgz
	unzip-5.42.tgz				urlview-0.9.tgz
	usbutil-0.4.tgz				uucp-1.06.2.tgz
	varconf-0.5.0.tgz			vat-4.0b2.tgz
	vgb-2.1.tgz				vic-2.8ucl4.tgz
	vid-1.0.1.tgz				viewfax-2.3.tgz
	vim-6.0.11-gtk.tgz			vim-6.0.11-no_x11.tgz
	viz-1.1.1.tgz				vnc-3.3.3r2.tgz
	vnc-viewer-3.3.3r2.tgz			vorbis-tools-1.0rc2.tgz
	vrfy-99.05.22.tgz			vtun-2.4.tgz
	w3m-0.2.1.0.19p1-m17n.tgz		w3m-0.2.1p3.tgz
	w3mir-1.0.10.tgz			w9wm-0.4.1.tgz
	waveplay-20001210.tgz			wbd-1.0ucl4.tgz
	wdiff-0.5.tgz				wdsetup-0.6b.tgz
	webalizer-2.01.06.tgz			weblint-1.020.tgz
	wget-1.7.tgz				whisker-1.4.tgz
	whowatch-1.4.tgz			wide-dhcp-1.4.0.3.tgz
	wily-0.13.41.tgz			windowmaker-0.65.1-i18n.tgz
	windowmaker-0.65.1.tgz			windowmaker-extra-0.1.tgz
	wine-990225.tgz				wmapm-3.1.tgz
	wmbiff-0.2p.tgz				wmbutton-0.4.tgz
	wmcalc-0.3.tgz				wmcalclock-1.25.tgz
	wmcube-0.98.tgz				wmcube-gdk-0.98p1.tgz
	wmdate-0.7.tgz				wmfishtime-1.23.tgz
	wmglobe-1.3.tgz				wmgrabimage-0.72.tgz
	wmicons-1.0.tgz				wminfo-1.51.tgz
	wmitime-0.3.tgz				wmmail-0.64.tgz
	wmmand-1.0.tgz				wmmenu-0.5-gdk_pixbuf.tgz
	wmmenu-0.5.tgz				wmminichess-0.8.tgz
	wmmixer-1.0b1.tgz			wmmon-1.0b2.tgz
	wmmoonclock-1.27.tgz			wmmp3-0.12.tgz
	wmnet-1.06.tgz				wmnetscapekiller-0.3.tgz
	wmphoto-0.3a.tgz			wmpinboard-1.0.tgz
	wmpop3-0.5.6a.tgz			wmspaceweather-1.04.tgz
	wmsun-1.03.tgz				wmtheme-1.2.9.tgz
	wmthemeinstall-0.62.tgz			wmtictactoe-1.1.1.tgz
	wmtime-1.0b2.tgz			wmtimebomb-0.2.0.tgz
	wmtimer-2.2.tgz				wmtune-1.1c-aztech.tgz
	wmtune-1.1c-radiotrack.tgz		wmtune-1.1c-zoltrix.tgz
	wmtz-0.7.tgz				wmwave-0.4.tgz
	wmweather-1.31.tgz			wmx-6.tgz
	workman-1.3a.tgz			wsoundprefs-1.1.1.tgz
	wsoundserver-0.4.0-esd.tgz		wsoundserver-0.4.0.tgz
	wterm-6.2.6.tgz				wv-0.6.5.tgz
	wwwcount-2.5.tgz			wwwoffle-2.5e.tgz
	x2vnc-1.2.tgz				x2x-1.27.tgz
	x48-0.4.0.tgz				xanim-2.80.1.tgz
	xantfarm-1.16.tgz			xarchie-2.0.10.tgz
	xasteroids-5.0.tgz			xbatt-1.2.1.tgz
	xbattle-5.4.1.tgz			xbill-2.0.tgz
	xbl-1.0j.tgz				xblast-2.6b.tgz
	xbmbrowser-5.1.tgz			xboard-4.2.3.tgz
	xboing-2.4.tgz				xbreaky-0.0.4.tgz
	xcb-2.3i.tgz				xcd-1.6.tgz
	xcdplayer-2.2.tgz			xcept-2.1.2.tgz
	xchat-1.8.4-no_ssl.tgz			xchat-1.8.4.tgz
	xco-1.3.tgz				xcoloredit-1.2.tgz
	xcolors-1.3.tgz				xcopilot-0.6.6.tgz
	xcubes-5.5.2.tgz			xcyrillic-2.0.tgz
	xd-8087.tgz				xdaliclock-2.18.tgz
	xdelta-1.1.1.tgz			xdino-5.5.2.tgz
	xdmchoose-1.1.2.tgz			xdtm-2.5.8.tgz
	xdu-3.0.tgz				xearth-1.1.tgz
	xemacs-21.1.14-mule.tgz			xemacs-21.1.14.tgz
	xemacs-sumo-21.20010204-mule.tgz	xemacs-sumo-21.20010204.tgz
	xengine-1.0.1.tgz			xephem-3.2.3.tgz
	xerces-1.4.3.tgz			xevil-1.5.tgz
	xfce-3.6.3.tgz				xfed-1.0.tgz
	xfedor-5.0.1.tgz			xfig-3.2.3d.tgz
	xfm-1.4.3.tgz				xfmail-1.4.6.tgz
	xforms-0.88.tgz				xfstt-1.1.tgz
	xgas-1.0.tgz				xglobe-0.5p2-no_map.tgz
	xglobe-0.5p2.tgz			xgolgo-1.0.tgz
	xgrab-2.41.tgz				xhippo-3.2.tgz
	xinvaders-2.0.tgz			xjewel-1.6.tgz
	xjig-2.4.tgz				xkeycaps-2.46.tgz
	xkobo-1.11-harder.tgz			xkobo-1.11.tgz
	xlbiff-3.0.tgz				xless-1.7.tgz
	xlhtml-0.2.9.8.tgz			xlife-5.3.tgz
	xloadimage-4.1.9.tgz			xlogout-1.1.tgz
	xmahjongg-3.5.tgz			xmame+xmess-0.37b13.2-x11.tgz
	xmame-0.37b13.2-x11.tgz			xmascot-2.6a.tgz
	xmbdfed-4.4.tgz				xmcd-2.6p1.tgz
	xmedcon-0.5.2.tgz			xmess-0.37b13.2-x11.tgz
	xmhtml-1.1.7.tgz			xmine-1.0.3.tgz
	xminehunter-0.4.tgz			xminesweep-3.0.tgz
	xmix-2.1.tgz				xmj-1.0.tgz
	xml2rfc-1.8-no_x11.tgz			xml2rfc-1.8.tgz
	xmmix-1.2.tgz				xmms-1.2.5.tgz
	xmms-esd-1.2.5.tgz			xmms-flac-1.0.tgz
	xmms-shn-2.2.4.tgz			xmms-smpeg-0.3.4.tgz
	xmms-vorbis-1.2.5.tgz			xmold-1.0.tgz
	xmp-1.1.5.tgz				xmris-4.04.tgz
	xmysql-1.9.tgz				xmysqladmin-1.0.tgz
	xnc-4.4.4.tgz				xneko-4.4.tgz
	xonix-1.4.tgz				xosview-1.7.4.tgz
	xpaint-2.6.1.tgz			xpat2-1.04.tgz
	xpdf-0.92.tgz				xphoon-91.9.18.tgz
	xpilot-4.4.1.tgz			xpostit-3.3.1.tgz
	xprobe-0.0.1p1.tgz			xprompt-1.4.tgz
	xps-3.21.tgz				xroach-4.4.tgz
	xruskb-1.15.0-motif.tgz			xruskb-1.15.0.tgz
	xscavenger-1.4.2.tgz			xscrabble-1.0.tgz
	xscreensaver-3.33-gtk.tgz		xskat-3.4.tgz
	xsnow-1.40.tgz				xsol-2.1.1.tgz
	xsoldier-0.96.tgz			xspread-3.1.1c.tgz
	xtacy-1.14.tgz				xtar-1.4.tgz
	xtattr-1.0.tgz				xteddy-2.0.1.tgz
	xterm-159.tgz				xtermset-0.5.1.tgz
	xtestpicture-1.1.tgz			xtimer-0.8089.tgz
	xtoolwait-1.3.tgz			xtraceroute-0.8.14.tgz
	xuvmstat-20010220.tgz			xv-3.10a.tgz
	xview-clients-3.2.1.tgz			xview-config-3.2.1.tgz
	xview-lib-3.2.1.tgz			xwit-3.4.tgz
	xworld-2.0.tgz				xwpe-1.5.22a.tgz
	xwrits-2.15.tgz				xxdiff-1.13.tgz
	xzoom-0.3.tgz				yafc-0.7.3.tgz
	yorick-1.5.02.tgz			ytalk-3.1.1-no_x11.tgz
	ytalk-3.1.1.tgz				ytree-1.73.tgz
	zangband-2.6.2-no_x11.tgz		zangband-2.6.2.tgz
	zap-1.1.tgz				zebra-0.92a-snmp.tgz
	zebra-0.92a.tgz				zh-Wnn-4.2.tgz
	zh-Wnndict-4.2.tgz			zh-bg5ps-1.3.0.tgz
	zh-c2t-1.0.tgz				zh-cless-290.tgz
	zh-crxvt-2.10.2.tgz			zh-fonts-arphicttf-2.11.tgz
	zh-fonts-kc-1.05.tgz			zh-fonts-taipei-1.01.tgz
	zh-lunar-2.1.tgz			zh-ttfm-0.9.3.tgz
	zh-xcin-2.3.04.tgz			zip-2.3.tgz
	zoo-2.10.1.tgz				zope-2.4.1.1.tgz
	zsh-4.0.2-static.tgz			zsh-4.0.2.tgz
	zsh-zftp-4.0.2.tgz			

	Note: these packages may not exist for all architectures; other
	packages may be added.  Some packages are only available via
	ftp.

Installing applications from the CD-ROM ports collection:

	The CD-ROM ``ports'' collection is a set of Makefiles, patches,
	and other files used to control the building and installation
	of an application from source files.  

	Creating an application from sources can require a lot of
	disk space, sometimes 50 megabytes or more.  The first step is
	to determine which of your disks has enough room.  Once you've
	made this determination read the file PORTS located on the
	CD-ROM which contains the ports tree.

	To build an application you must:

	1) become the superuser (root)
	2) have network access, or obtain the actual source files by
	   some other means.
	3) cd to the ports directory containing the port you wish
	   to build.  To build samba, for example, where you'd
	   previously copied the ports files into the /usr/ports
	   directory: cd /usr/ports/net/samba
	4) make
	5) make install
	6) make clean

Installing applications from the OpenBSD ports collection:

	See http://www.openbsd.org/ports.html for current instructions
	on obtaining and installing OpenBSD ports.

	You should also refer to the ports(7) manual page.

Installing other applications:

	If an OpenBSD package or port does not exist for an application
	you're pretty much on your own.  The first thing to do is ask
	ports@openbsd.org if anyone is working on a port -- there may
	be one in progress.  If no luck there you may try the FreeBSD
	ports or NetBSD package collection.  If you are on an i386 based
	machine it is quite possible that the FreeBSD port, if one exists,
	will work for you.

	If you can't find an existing port try to make your own and
	feed it back to OpenBSD.  That's how our ports collection grows.
	Some details can be found at http://www.openbsd.org/porting.html
	with more help coming from the mailing list, ports@openbsd.org.



Administrivia:
--------------

There are various mailing lists available via the mailing list
server at <majordomo@OpenBSD.ORG>.  To get help on using the mailing
list server, send mail to that address with an empty body, and it will
reply with instructions.  There are also two OpenBSD Usenet newsgroups,
comp.unix.bsd.openbsd.announce for important announcements and
comp.unix.bsd.openbsd.misc for general OpenBSD discussion.

To report bugs, use the 'sendbug' command shipped with OpenBSD,
and fill in as much information about the problem as you can.  Good
bug reports include lots of details.  Additionally, bug reports can
be sent by mail to:

	bugs@OpenBSD.ORG

Use of 'sendbug' is encouraged, however, because bugs reported with it
are entered into the OpenBSD bugs database, and thus can't slip through
the cracks.

As a favor, please avoid mailing huge documents or files to the
mailing lists.  Instead, put the material you would have sent up
for FTP somewhere, then mail the appropriate list about it, or, if
you'd rather not do that, mail the list saying you'll send the data
to those who want it.